Heavy Duty Steel Brackets

1. The bridge is fixed, the horizontal is vertical, the arrangement is reasonable, the cover is not well, the interface is strict, the corner, the corner, but the connection is correct, and the wire tank is inside and outside the line.

2. The frame is reasonably arranged, fixed, and flat according to the requirements.

3. When the line passes through the beam, wall, the floor, the bridge should not be wiped on the building. The wire slot and the electrical appliance are tightly connected, and the wires are not exposed. 

4. The straight and verticality allowance deviations of the bridge level or vertically laid linear portion should not be 5 mm. When the user installs the stainless steel cable bridge, the cable fixed-to-installation process is carried out, and the stainless steel Heavy Duty Steel Brackets manufacturer must master the process, and can reduce the external tasys and protect the external things.

In order to make the cable fixation in the bridge, you must master the bridge installation process, only this can be obtained. To make the overall presence, it needs to be done according to the actual requirements when the fixed cable is fixed, and the quality of its final achievement is also the paragraph, so it should be good to master.

According to Heavy Duty Steel Brackets manufacturers, we should follow the basic installation principles when fixed cables while hoping that it can. The cable is fixed during the production process of stainless steel cable, and it is necessary to have a good design for its reserved space, only this can be installed.

http://www.chinaelectrictelecommunication.com/